Melemo ea Sehlahisoa
Ho sebetsa hantle haholo 330W Solar Panel PV Module
● Khanyetso ea PID.
● Motlakase o Phahameng ka ho Fetisisa.
● 9 Bus Bar Half Cut Cell e nang le PERC Technology.
● Matlafatsoa Tšehetso ea Machanical 5400 Pa Snow Load, 2400 Pa moea Mojaro.
● 0 ~+5W Mamello e Ntle.
● Ts'ebetso e Ntle ea Lebone le Lesea.
Lihlahisoa tsa lihlahisoa
Litekanyo tsa ka ntle | 1590x1038x30 limilimithara |
Boima ba 'mele | 18.0 lik'hilograma |
Lisele tsa letsatsi | PERC Mono (108 pcs) |
Khalase e ka Pele | 3.2mm AR e roala khalase e futhumetseng, tšepe e tlase |
Foreimi | Motsoako o motšo oa anodized aluminium |
Lebokose la Junction | IP68, 3 diode |
Lithapo tse hlahisoang | 4.0 limilimithara2, 250mm(+)/350mm(-) kapa Bolelele bo Customized |
Mojaro oa Mechini | Lehlakore le ka pele 5400Pa/ Lehlakore le ka morao 2400Pa |
Lintlha tsa Sehlahisoa
Khalase ea Solar Panel
● High-transmittance and low reflection.
● Ho hlahloba: GB15763.2-2005.ISO9050.
● Tšebeliso e phahameng ea letsatsi.
● Matla a phahameng a mochine.
● Bophahamo bo phahameng.
EVA
● Ho tšoarella ka mokhoa o babatsehang, joalo ka ho hanyetsa boemo ba leholimo, mocheso o phahameng le ho hanyetsa mongobo o phahameng, ho hanyetsa khanya ea UV.
● Phatlalatso e babatsehang ea khanya le pepeneneng.
● Ho se sebetse le ho se kotsi liseleng tsa letsatsi nakong ea ts'ebetso.
● E-ba le sekhahla se phahameng sa ho kopanya sefapano ka mor'a lamination.
● Lintho tse ntle tsa encapsulating.
Lisele tsa letsatsi
● Matla a phahameng a tlhahiso: katleho ea moqoqo ke 18% -22%.
● High shunt-resistance: ikamahanya le maemo a 'maloa a tikoloho.
● Bypass diode e fokotsa ho theoha ha matla ka moriti.
● Tšusumetso e ntle ea khanya e tlase.
● Sekhahla se tlase sa ho robeha.
Leqephe le ka Morao
● Ho hanyetsa Boemo ba Leholimo bo Phahameng.
● Tšireletso e Phahameng.
● Tšireletso e phahameng.
● Ho hanyetsa Moholi oa Metsi a Phahameng.
● Ho khomarela ho Phahameng.
● Ho lumellana ho Phahameng.
Foreimi
● Profaele ea aluminium extrusion e nang le thomello e potlakileng.
● E fumaneha ka mokhoa o hlophisitsoeng oa sefahleho.
● Thepa e ntle haholo bakeng sa likarolo tse boreleli le tse poteletseng.
● Extrusion bakeng sa kaho le merero e meng ea indasteri.
● Botenya bo fetoha ho latela kopo e khethehileng.
Lebokose la Junction
● Matla a phahameng a hona joale le a motlakase.
● Kopano ea tšimo e bonolo, e potlakileng le e sireletsehileng.
● IP 68 e ka sebelisoa tikolohong ea tšepe ea ka ntle.
● Sehokelo sa katoloso se teng bakeng sa litlhoko tsa nako e tlang.
● Lihokelo tse peli tse sa feleng li ikamahanya le lihokelo tsohle.
Tlhaloso ea Setsebi
Litšobotsi tsa Motlakase
Boholo ba Matla ho STC (Pmp): STC330, NOCT248
Open Circuit Voltage (Voc): STC36.61, NOCT34.22
Nako e Khutšoane ea Potoloho ea Hona Joale (Isc): STC11.35, NOCT9.12
Boholo ba Motlakase oa Matla (Vmp): STC30.42, NOCT28.43
Boholo ba Matla a Hona Joale (Imp): STC10.85, NOCT8.72
Sebetsa sa Mojule ho STC(ηm): 20
Mamello ea Matla: (0, +4.99)
Boholo ba Motlakase oa Sisteme: 1000V DC
Maximum Series Fuse Rating: 25 A
STC: lrradiance 1000 W/m² mojulung mocheso 25°C AM=1.5
Mamello ea tekanyo ea matla: +/-3%
Litšobotsi tsa Mocheso
Pmax Temperature Coefficient: -0.34 %/°C
Mocheso oa Mocheso oa Voc: -0.26 %/°C
Thempereichara ea Isc: +0.05 %/°C
Mocheso oa ho sebetsa: -40°+85 °C
Mocheso ka Lebitso oa Mocheso oa Lisele (NOCT): 45±2 °C
Kopo ea Lihlahisoa
Mokhoa oa Tlhahiso
Taba ea morero
Pontšo
Sephutheloana&Delivery
Ke Hobane'ng ha U Khetha Autex?
Autex Construction Group Co., Ltd. ke mofani oa litšebeletso tsa tharollo ea matla a hloekileng lefatšeng ka bophara le moetsi oa theknoloji e phahameng ea photovoltaic modulemanufacture. Re ikemiseditse ho fana ka ditharollo tsa nako e le nngwe tsa eneji ho kenyeletswa phepelo ya matla, taolo ya eneji le polokelo ya eneji ho bareki lefatsheng ka bophara.
1. Tharollo ea moralo oa setsebi.
2. One-Stop ho reka mofani oa litšebeletso tsa ho reka.
3. Lihlahisoa li ka etsoa ho latela litlhoko.
4. boleng bo phahameng pele ho thekiso le tšebeletso ea ka mor'a thekiso.